Windmill Ceiling Fan Product Specs
46", 52", 60", 66" and 72" Windmill Ceiling Fans
(includes 9" down rod)
14-18 blades – .045 aluminum, tubing ¾” square, 1/8” wall
14 gauge aluminum spoke hub
6 spokes are solid 3/8" aluminum
Fans weigh between 40 and 50 lbs depending on the size and finish
84" Windmill Ceiling Fan
16 blades - .063 aluminum, tubing ¾” square, 3/16” wall
8 spokes are solid 7/16” aluminum
Fans weigh between 50 and 65lbs depending on the size and finish
96" Windmill Ceiling Fan
18 blades - .063 aluminum, tubing ¾” square, 3/16” wall
8 spokes are solid 7/16” aluminum
Fans weigh between 50 and 65lbs depending on the size and finish
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.
Special Note to Customers: Due to the size of our fans, amount of material used for each fan, and the number of blades, you must be prepared for the fan to take up to 2 minutes to be at desired speed. The fan will maintain this speed for consistent airflow. Patience is Important!
Windmill Ceiling Fan Motor Details
The Patriot
-
Can be used on the 46", 52”, 60”, 66”, 72" sizes
-
The motor housing dimensions - Diameter is 10" / Depth is 6.5" with no uplight and 8" with uplight.
-
Variable speed 35 - 60 RPM
-
Industrial ball ceiling mount with 3"H x 6.5”D valance included. (Photo B)
-
Quiet, gearless motor
-
.5 AMPS
-
CFM range up to 4500
-
High-efficiency electricity rating. Indoor/outdoor use. Damp-rated. Can be used on a flat or sloped ceiling (up to 45 degrees)
-
Reversible can be switched on the wall controller and remote
The American
-
Can be used on any size fan but required for the 84” and 96” fan
-
The motor housing dimensions from top to bottom 13"
-
RPM range of 10 to 60
-
Geared motor, slight gear noise
-
Includes wall mount control box/converter with variable speed and 115 Volt AC input converts to DC current and uses normal electrical wire to fan. (Wall-mount control box MUST be used with this fan. dimensions: 7" height X 5" depth X 3" width). (Photo C)
-
Heavy-duty 18” mounting bracket for the high torque DC motor. (18" x 1 3/4" x 2 1/8" dimensions) (Photo D)
-
1.3 AMPS
-
CFM range 3500 – 7000
-
1/12 hp but more importantly it has 78 lbs of torque
-
High-efficiency electricity rating. Indoor/outdoor use. Damp-rated. Can be used on a flat or sloped ceiling (up to 85 degrees)
Photo A
Photo AA
Photo B
Photo C
Photo D
The American Sound
Lighting
The Up Light has one LED strip 48 Watts (second strip can be requested, Dimmable, Waterproof and 4200 Kelvin Daywhite)
The Down Light is a 18W Lumen 1400 Color 3000
Downloadable Installation Instructions Available
Do you need Technical Support? Call direct 972-834-5555
Need Help With Your Remote and Fan?
Please note: Contact us directly for your specific questions or to talk with our design specialist for your home's decor specifications.
[testimonial_rotator id=4738]