Windmill Ceiling Fan Product Specs
46", 52", 60", 66" and 72" Windmill Ceiling Fans
(includes 9" down rod)
14-18 blades – .045 aluminum, tubing ¾” square, 1/8” wall
14 gauge aluminum spoke hub
6 spokes are solid 3/8" aluminum
Fans weigh between 40 and 50 lbs depending on the size and finish


84" Windmill Ceiling Fan
16 blades - .063 aluminum, tubing ¾” square, 3/16” wall
8 spokes are solid 7/16” aluminum
Fans weigh between 50 and 65lbs depending on the size and finish
96" Windmill Ceiling Fan
18 blades - .063 aluminum, tubing ¾” square, 3/16” wall
8 spokes are solid 7/16” aluminum
Fans weigh between 50 and 65lbs depending on the size and finish
Note: Our fans are not mass-produced. Each of our windmill ceiling fans are hand-crafted, they might have slight variances and the rings may not be perfectly round or flat, very similar to an actual windmill in a pasture.
Special Note to Customers: Due to the size of our fans, amount of material used for each fan, and the number of blades, you must be prepared for the fan to take up to 2 minutes to be at desired speed. The fan will maintain this speed for consistent airflow. Patience is Important!
Windmill Ceiling Fan Motor Details
The Patriot
-
Can be used on the 46", 52”, 60”, 66”, 72" sizes
-
The motor housing dimensions from top to bottom 6"
-
RPM range from 10 to 100 depending on fan size
-
16 speed capability - Wall switch (Photo A) included or additional remote (Photo AA) can be purchased. Either the wall switch or the remote must be used for fan operation. If you choose to use the remote the wall controller is not necessary.
-
Industrial ball ceiling mount with 3"H x 6.5”D valance included. (Photo B)
-
Quiet, gearless motor
-
.5 AMPS
-
CFM range up to 4500
-
High-efficiency electricity rating. Indoor/outdoor use. Damp-rated. Can be used on a flat or sloped ceiling (up to 45 degrees)
-
Reversible can be switched on the wall controller and remote
The American
-
Can be used on any size fan but required for the 84” and 96” fan
-
The motor housing dimensions from top to bottom 13"
-
RPM range of 10 to 60
-
Geared motor, slight gear noise
-
Includes wall mount control box/converter with variable speed and 115 Volt AC input converts to DC current and uses normal electrical wire to fan. (Wall-mount control box MUST be used with this fan. dimensions: 7" height X 5" depth X 3" width). (Photo C)
-
Heavy-duty 18” mounting bracket for the high torque DC motor. (18" x 1 3/4" x 2 1/8" dimensions) (Photo D)
-
1.3 AMPS
-
CFM range 3500 – 7000
-
1/12 hp but more importantly it has 78 lbs of torque
-
High-efficiency electricity rating. Indoor/outdoor use. Damp-rated. Can be used on a flat or sloped ceiling (up to 85 degrees)


Photo A


Photo AA


Photo B


Photo C


Photo D
The American Sound
Lighting
The Up Light has one LED strip 48 Watts (second strip can be requested, Dimmable, Waterproof and 4200 Kelvin Daywhite)
The Down Light is a 18W Lumen 1400 Color 3000
Downloadable Installation Instructions Available
Do you need Technical Support? Call direct 972-834-5555
Need Help With Your Remote and Fan?
Please note: Contact us directly for your specific questions or to talk with our design specialist for your home's decor specifications.